4manual dial – Microsoft 2045 User Manual
Page 64
Other Transmission Features
52
4
Manual Dial
The external telephone is required.
Pick up the handset of the external
telephone and dial. When the line is
connected and you hear a high-
pitched tone, press the
{{{{Start}}}} key to
send your fax message. If, on the oth-
er hand, you hear a voice at the other
end, continue conversation as nor-
mal.
Limitation
❒ This function is unavailable for the
optional extra G3 interface unit.
❒ The result of a transmission with
Manual Dial is not mentioned in
the Transmission Result Report
(Immediate Transmission).
AAAA
Place the original, and then select
the scan settings you require.
Reference
p.11 “Placing Originals”, Fac-
simile Reference
Reference
BBBB
Pick up the external telephone.
You will hear a tone.
CCCC
Dial.
The machine immediately dials the
destination.
Note
❒ If you make a mistake, replace
the external telephone, and then
try again from step
B
.
DDDD
When the line is connected and
you hear a high-pitched tone,
press the
{{{{Start}}}} key to send your
fax message.
Note
❒ If you hear a voice, tell the re-
ceiver that you want to send
them a fax message (ask them to
switch to facsimile mode).
EEEE
Replace the handset of the exter-
nal telephone.
After transmission, the standby
display appears.
Note
❒ If you want to cancel a transmis-
sion, press the
{{{{Clear/Stop}}}} key,
and then remove the originals.