Microsoft 2045 - Manual (Page 57)

Advanced Features
45
4
Advanced Features
SUB Code
Normally you can only use Confiden-
tial Transmission to send messages to
fax machines of the same manufactur-
er that have the Confidential Recep-
tion function. See p.7 “Confidential
Transmission”. However, if the other
machine supports a similar function
called “SUB Code”, you can send fax
messages to the other party using this
method instead.
Note
❒ The ID can be up to 20 digits long.
❒ You can enter numbers, *, #, and
spaces to program an ID.
❒ Make sure the number of digits in
the ID matches the specification of
the machine to which you are
sending.
❒ You can store IDs in Destination
lists and Programs. See "Register-
ing a Fax Destination", General Set-
tings Guide. See p.113 “Registering
and Changing Keystroke Pro-
grams”.
❒ Messages you send using this
function are marked “SUB” on all
reports.
AAAA
Place the original, and then select
the scan settings you require.
BBBB
Dial the fax number using the
number keys.
CCCC
Press [Adv. Features].
DDDD
Select [SUB Code].
EEEE
Press [TX SUB Code].
FFFF
Enter a SUB code, and then press
[OK]
.
"SUB Code" appears one line
above [Adv. Features] on the dis-
play.
Note
❒ If you make a mistake, press
[Cancel] or the
{{{{Clear/Stop}}}} key
before pressing [OK], and then
try again.
To cancel entering a SUB code,
press [Cancel]. The display returns
to that of step
E .
GGGG
To enter a password, press [Pass-
word (SID)]
.
HHHH
Enter the password with the
number keys, and then press [OK].