Microsoft 2045 - Manual (Page 104)

Reception Features
92
5
❒ The print area is determined by the
optional expansion memory, reso-
lution, and the vertical length of
the originals.
❒ If paper longer than 600 mm is
used, the paper may get wrinkled,
it may not be sent, or a paper jam
may occur.
❒ The machine can detect A4L,
A3
L(8 1 /
2
"
×11"L, 11"×13"L) pa-
per sizes. When you load any other
size, specify the paper size. See
p.158 “Programming Bypass Tray
Paper Size” .
❒ When using tray 1 of the optional
1000-sheet finisher, paper is out-
put to the tray even with non-
standard sizes selected.
❒ If the specified paper size and the
size of paper set in the bypass tray
do not match, paper jams may oc-
cur, or the image may be truncat-
ed.
❒ If messages are printed on paper
smaller than A4, the image may be
truncated, or split across sheets.
❒ If you use this function, Image Ro-
tation and 180-Degree Rotating
Printing are not possible.