Microsoft 2045 - Manual (Page 18)

Transmission Mode
6
1
Priority Transmission
Documents you send with Memory
Transmission are sent in the order
they are scanned. Therefore, if several
messages are queued in memory, the
next document will not be sent imme-
diately. However, by using this func-
tion you can have your message sent
before other queued messages.
Limitation
❒ This function is not available with
Immediate Transmission. If this
function is selected, the machine
automatically switches to Memory
Transmission.
Note
❒ If there is already a message stored
with this function or a transmis-
sion in progress, your message will
be sent after that message has been
transmitted.
AAAA
Place the original, and then select
the scan settings you require.
Reference
p.27 “Scan Settings”, Facsimile
Reference
BBBB
Press [Transmission Mode].
CCCC
Select [Priority TX], and then press
[OK]
.
The standby display appears.
Note
❒ To check the settings, press
[Transmission Mode] .
DDDD
Dial, and then press the
{{{{Start}}}}
key.
Note
❒ Press [Change/Stop TX File] to
cancel the transmission.