Microsoft 2045 User Manual
Page 62
Other Transmission Features
50
4
With Transfer Requests set in the System
Settings
You can program a Quick Dial key
with Transfer Station and/or End Re-
ceiver using the Transfer Request
function in the System Settings. See
the General Settings Guide.
AAAA
Place the original down, and then
select the desired settings.
Reference
p.11 “Placing Originals”, Fac-
simile Reference
Reference
BBBB
Press the key programmed with
Transfer Request.
CCCC
Press the
{{{{Start}}}} key.
-
-
-
-Setting Multistep Transfer
Register a Transfer Station in a Desti-
nation list. When receiving a transfer
request that specifies the same End
Receiver as programmed in the Desti-
nation list, this machine sends a trans-
fer request to the pro gra mm ed
Transfer Station. This function allows
fax messages to be transferred via
multiple stations and makes fax mes-
sage transfer more efficient.
You can program up to 30 End Re-
ceivers per Transfer Station. For more
information, contact your service rep-
resentative.