Motorola 326X V.34 User Manual

Page 56

3-6 Getting Started

ing Start

Example: Accessing a Configuration Option

To select a predefined configuration option set:

1) From the Data 9600 T/D? display, press

until Select Options=1 displays.

2) Press

to display Select Options:2, Select Options:3, or Select Options:4.

3) Press

to select an option. The modem is now configured for the option.

Status Displays

The Data 9600 T/D? category is the default display when the modem is powered-up
or after the modem has “timed-out” (i.e., the front panel control keys have not been
used for at least five minutes). The data rate (9600, in the display Data 9600 T/D?)
is the current DCE (modem-to-modem) data rate. It varies with the speed at which
the modems connect. The Data 9600 T/D? category serves three primary functions:

• Talk/Data” Switch

• Operating Status Displays

• Option Sets/Dialing Options

Talk/Data Switch
Pressing

when Data 9600 T/D? is displayed toggles the modem between using:

• An external telephone to manually dial a telephone call

• The modem to dial a stored or unstored telephone number

Down

Steps through categories (example: Data 9600 T/D?, TEST OPTS,
MODULATION OPT’S), or, at a parameter within a category, scrolls through
the options.

Enter

Selects an option and/or initiates an action. This key also serves as a Talk/Data
“softkey,” allowing you to toggle between using a telephone and the modem to
establish a telephone connection.

Table 3-2.
Front Panel Keys

Keys

Function

NOTES:

1) If you hold the

key down, it repeats until you stop pressing.

2) With the 3262/3267 Modems, to toggle between modem A and modem B front

panels, hold

while pressing

DATA 9600 T/D?

Select Options