Motorola 326X V.34 - Manual (Page 163)

Configuration Quick Reference A-41
C
onfiguration
Q
uick-Reference
Result Codes
Result codes are responses sent to the terminal by the AT ACU. Result codes may be
sent in word form (RsltForm=Verbose or ATV1), numeric form (RsltForm=Numeric
or ATV0), or disabled (RsltCode=Disable or ATQ1). When numeric form is selected,
the modem issues only a number code.
The rate displayed in a CONNECT message depends on the Connect Message option
(ACU OPTS menu). If Con Msg=DTE Rate, the DTE-to-modem rate is displayed. If
Con Msg=DCE Rate, the modem-to-modem rate is displayed. If Speed Conver-
sion=Off (AT
* SC0), or if the modem is operating in Direct or synchronous modes,
the CONNECT message speed reflects both the DTE-to-modem and the modem-to-
modem rate, which are the same.
Table A-5 provides a listing of word- and numeric-form result codes.
Table A-5.
Result Codes
Word Form Response Numeric Form Response
OK 0
CONNECT 1
RING 2
NO CARRIER 3
ERROR 4
CONNECT 1200 5
NO DIALTONE 6
BUSY 7
NO ANSWER 8
PASSWORD PROTECTED 40
INITIATING RC 50
RC NOT AVAILABLE 51
RC FAILED 52
RC DENIED 53
RC ESTABLISHED 54
UNDER RMT CONFIG 55
RC COMPLETE 56
RC ABORTED 57
RC SESSION IN PROGRESS 58
NETWORK MANAGEMENT INHIBITED 60
CONNECT 600 13
CONNECT 2400 10
CONNECT 4800 11
CONNECT 7200 15
CONNECT 9600 12
CONNECT 12000 16
CONNECT 14400 17
CONNECT 16800 18
CONNECT 19200 14
CONNECT 21600 19