Motorola 326X V.34 - Manual (Page 159)

Configuration Quick Reference A-37
C
onfiguration
Q
uick-Reference
Performing Numeric Entry
The following options require you to enter information using the front panel or ACU.
The keystrokes to set the numeric entry for these options are as follows:
1) Step across the front panel menu by pressing until the option you want to
change displays.
2) Press . You are now ready to key in the numeric entry.
3) Press until the digit or character you want appears in the leftmost position
of the display.
Example: 1xxxxx
4) Press . The display shifts one position to the left, and the second character
position is displayed.
5) Repeat Steps 3 and 4 until you have completed keying in the numeric entry. To
re-enter a number or character, press to place the cursor at the beginning of
the line, then re-enter the number or character.
6) Press to save your selection.
Front Panel Option Description
Enter Phone #=n Stores phone number to phone book memory in location n.
Enter Then Dial Lets you dial from the front panel.
S-Reg xxx=nnn Lets you set S-Register xxx to nnn.
LPDA-2 Addr=nnn Lets you set the LPDA2 address.
Enter PW:nnnn Lets you unlock a modem’s password protection.
Old PW:nnnn Lets you enter old password.
New PW:nnnn Lets you configure new password.
Verify PW:nnnn Lets you verify new password.
Enter Group PW: Lets you verify group password.
NC Address:nnn Lets you set network control address.
New Address:nnn Lets you set remote modem’s leased line address.
Rmt Ser:nnnnnnn Lets you enter remote modem’s serial number.