Motorola 326X V.34 - Manual (Page 160)

A-38 Configuration Quick Reference
Configur
ation
Q
uick-Ref
e
re
nce
S-Register/AT Command Cross-Reference
This section shows the modem’s S-Registers cross-referenced with AT Commands
and front panel options. (For details on S-Registers, refer to Chapter 5, Using the AT
Automatic Calling Interface.)
Table A-3.
S-Register Cross-Reference
S-Register AT Command Front Panel Option
S0—Ring Count to Answer On AT * AA5 Answer=Using S0
S1—Ring Count — —
S2—Escape Code Character — —
S3—Carriage Return Character — —
S4—Line Feed Character — —
S5—Backspace Character — —
S6—Wait for Dial Tone AT * BD2 Blind Dial=S6
S7—Wait for Data Character AT * DD9 Dial Wait=S7
S7—Wait for Data Character AT * TT5 Call Timeout=S7
S8—Pause Time for Pause Delay Dial
Modifiers
AT * DP4 Pause Delay=S8
S10—Carrier Loss Hang Up Delay AT * CD3 DCD Loss Dis=S10
S11—DTMF Tone Duration AT * TL1 Tone Length=S11
S12—Escape Code Guard Time — —
S18—Test Timer — —
S25—Delay Before Looking for DTR — —
S26—RTS/CTS Delay AT * DL4 RTS/CTS Delay=S26
S30—DTE Inactivity Disconnect AT * SI5 Inactivity=S30
S38—Disconnect Buffer Delay AT * DB3 Delay=S38
S45—Access Security Tone Duration — —
S46—Access Security Lead Digit Delay
Timeout
S96—Signalling System #5 AT * S96 =0 to 1
S97—Break Signal Duration AT * S97 =0 to 39
S98—AC Detect AT * S98 =0 to 1
S99—V.32 Training Time AT * S99 =0 to 216