Motorola 326X V.34 - Manual (Page 11)

xi
Using the Documentation Set
Overview
The 326X product documentation set includes the 326X V.34 Series Modem Refer-
ence Card (T0009-01).
Optionally, with a 326X Series Modem card backplane (to install a 326X card into a
Modulus 9 or 21 enclosure), you receive the following:
• 326X Series Modem Cards (Part No. 09949)
Throughout this guide, references to the 326X Series Modem apply to 326X V.32bis,
326X V.34, and 326X-SDC Series Modems, unless stated otherwise.
326X Series Modem Family
The 326X product family consists of three series: V.34, V.34 SDC, and V.32bis.
IMPORTANT: When you select a modulation mode, you must ensure that the Max
Rate (AT*MX) and Min Rate (AT*MN) parameter options are within the valid range
for the mode.
Some 326XFAST-SDC models are available with a V.35-compatible interface. This
unit has a DB25 connector, so a converter is required.
Product Family Model Numbers
Motorola refers to the product family as 326X because the last digit denotes the
modem model. Model numbers (“X”) are as follows.
This Series...
Supports This
Modulation... This Maximum
DCE Rate... And This Maximum
DTE Rate:
326XFAST V.34 ITU V.34 33.6 kbps 128 kbps, asynchronous
326XFAST-SDC ITU V.34 33.6 kbps 128 kbps, asynchronous, and,
with proprietary compression,
128 kbps synchronous
326X ITU V.32bis 14.4 kbps 57.6 kbps, asynchronous
This Model Number... Denotes:
3260, 3261, 3262, 3263 Models for use in the U.S.A.
3265, 3266, 3267, 3268 Equivalent models, respectively, for international use;
provided in country-specific setups
3260, 3265 Standalone models for:
• Two-wire dial operation
• Two-wire leased-line operation