Monarch Instrument 9402 - Manual (Page 92)

Modem Control
To change the setting, follow steps 1 through 6 at the
beginning of this chapter. Then follow the steps below.
1. Press 2 until you see
DIAG COMM
< Modem Control >
2. Press 6 . You will see the previous setting, for example
MODEM CONTROL
No >
The modem control options are
Yes
No
3. Press 1 or 2 to display the option you need, then
press
6
. You will see
DIAG COMM
< Modem Control >
4. Press
8
three times to return to the Main menu and
save your changes.
NOTE: The printer will not save your changes if you turn
it Off before returning to the Main menu.
9401/9402 Operator’s Handbook
11-8