Monarch Instrument 9402 - Manual (Page 20)

2. Press
6
. You will see
SETUP
Supply >
3. Press 6 . You will see the first supply option.
SUPPLY
Ribbon >
To change a supply option, follow the instructions under the
option name. To exit an option without changing the setting,
press
8
.
Ribbon
You can print with or without a ribbon. You must tell the printer
which option you want.
The default setting for Ribbon is No. To change the setting,
follow steps 1 through 3 at the beginning of this chapter. Then
follow the steps below.
1. Press 6 to set the ribbon option. You will see the
previous setting, for example
RIBBON
No >
2. Press
1
or
2
until you see the option you want. Then
press
6
. You will see
SUPPLY
Ribbon >
NOTE: If you set the Ribbon option to Yes, be sure you
install a ribbon before printing.
9401/9402 Operator’s Handbook
3-2