Monarch Instrument 9402 - Manual (Page 71)

3. The screen displays the quantity from the last batch. You
can
•
press 6 to print the displayed quantity.
•
type the number of tags or labels you want and press
6 .
The batch will begin printing. When it finishes, you will see
PRINT MODE
Ready
Changing Supplies
If you open the printhead, you will see
Load Supplies
Press ENTER._
If you are loading or changing supplies, refer to your
Equipment Manual. To resume operation, close the printhead,
then press
6 . You will see
Fault Corrected?
< Yes
Press
6
. The printer will calibrate, and you will see the
Main menu (or the Pause menu, if you paused a batch).
Changing Supply Types
If you change from thermal transfer supplies (printing with a
ribbon) to thermal direct supplies (printing without a ribbon) or
vice-versa, you must change the Ribbon supply option. Refer
to Chapter 3, "Setting Supply Options" for information on
changing the Ribbon option.
P
ri
n
ti
n
g
O
ffl
in
e
8. Printing Offline
8-19