Monarch Instrument 9402 - Manual (Page 90)

Parity
To change the setting, follow steps 1 through 6 at the
beginning of this chapter. Then follow the steps below.
1. Press 2 until you see
DIAG COMM
< Parity >
2. Press 6 . You will see the previous setting, for example
PARITY
None >
The parity options are
None
Odd
Even
3. Press
1
or
2
to display the parity you need, then press
6
. You will see
DIAG COMM
< Parity >
4. Press 8 three times to return to the Main menu and
save your changes.
NOTE: The printer will not save your changes if you turn
it Off before returning to the Main menu.
9401/9402 Operator’s Handbook
11-6