Setting the contrast – Monarch Instrument 9402 User Manual
Page 39
5. Setting the Contrast
This chapter explains how to adjust the contrast on your
supply. Contrast controls the darkness of the printing on your
supply. The range is -50 to +50, and the default is 0.
NOTE: The normal print contrast setting (+00) prints
accurate bar codes on most supplies. If you
change the print contrast, use a bar code verifier
to be sure your bar codes scan correctly.
•
Darken the printing by increasing the number.
•
Lighten the printing by decreasing the number.
1. From the Main menu, press
1
or
2
until you see
MAIN MENU
<
Setup
>
2. Press
6
. You will see
SETUP
Supply
>
3. Press
2
until you see
SETUP
<
Contrast
>
MAIN MENU
SUPPLY
CONTRAST
DEFAULTS
PORT
SETTINGS
PASS-
WORDS
CANCEL
ALL
PRINT
MODE
BATCH
ENTRY
REPEAT
BATCH
SETUP
MEMORY
CARD
DIAG.
S
e
tt
in
g
t
h
e
Co
n
trast
5-1