Monarch Instrument 9402 - Manual (Page 19)

3. Setting Supply Options
This chapter explains how to set the supply options for the
ribbon, separators, feed mode, print position, supply position,
and the margin position.
You may need to set supply options often to adjust for different
supplies. The options are shown below.
1. From the Main menu, press
1
or
2
until you see
MAIN MENU
< Setup >
SUPPLY CONTRAST DEFAULTS
PORT
SETTINGS
PASS-
WORDS
SEPARA-
TORS
FEED
MODE
PRINT
POS.
SUPPLY
POS.
MARGIN
POS.
MAIN MENU
CANCEL
ALL
PRINT
MODE BATCH
ENTRY REPEAT
BATCH SETUP
MEMORY
CARD DIAG.
RIBBON
Option Values Default
Ribbon Yes/No No
Separators On/Off Off
Feed Mode On-Demand/Continuous Continuous
Print Position -99 to +999 dots +0
Supply Position -99 to +99 dots +0
Margin Position -99 to +99 dots +0
S
e
tt
ing
S
upp
ly
Opt
io
n
s
3-1