Fmt-1 – Monarch Instrument 9402 User Manual
Page 74
To enter data for a format, start from the Main menu and follow
the directions under the name of the format you want to use.
To select a format, do one of the following:
•
press
1
or
2
to display the format you want, then
press
6
to select it.
•
type the number of the format you want, then press
6
to select it. For more information, refer to
Appendix B.
FMT-1
To print FMT-1 with the data shown in this example, load
supply that is 1 3/8" long by 2" wide (35 mm long by 50.8 mm
wide). Then follow the steps below.
Screen Prompt
What You Do
MAIN MENU
<
Batch Entry
>
Press
6
.
Selects the Batch Entry
operating mode. You will see
the last format type that was
selected, such as Temporary.
9401/9402 Operator’s Handbook
9-2