Matrox Electronic Systems 4SIGHT-M - Manual (Page 89)

Advanced menu 89
Options:
- Disabled
- Primary
- Secondary
- Both (default)
• Smart device monitoring.
This item allows you to enable or disable IDE failure prediction.
Options:
- Enabled (default)
- Disabled.
I/O Device Configuration submenu
• Serial port A.
This item allows you to enable or disable serial port A (the top serial port).
By selecting Disabled, the serial port is not configured and is turned off. It also
frees up IRQ 4 and I/O addresses 3F8h to 3FFh. By selecting Enabled, the port
is turned on, but requires that you select the base I/O address from the
subsequently displayed list of available base addresses. By selecting Auto, the BIOS
configures the serial port’s base address during POST.
Options:
- Disabled
- Enabled
- Auto (default)
MATROX IMAGING est distribué par TECHWAY - www.techway.fr - [email protected] - +33 (0)1 64 86 58 30