Matrox Electronic Systems 4SIGHT-M - Manual (Page 127)

Pinouts of back panel connectors 127
Use Matrox cable DBHD44-TO-13BNC to interface video sources through
Matrox 4Sight-M’s video input connector to a Matrox Meteor-II /Standard frame
grabber (designed for Matrox 4Sight-M). The cable has thirteen BNC connectors,
and a high-density 44-pin D-Subminiature male connector.
Use Matrox cable DBHD44-TO-8BNC to interface video sources through
Matrox 4Sight-M’s video input connector to a Matrox Meteor-II /Multi-Channel
frame grabber (designed for Matrox 4Sight-M).
Create your own cable to access special signals supported by Matrox Meteor-II
/Camera Link, such as special user input and output signals, through the 44-pin
video input connector of Matrox 4Sight-M.
For customers planning to build their own cable, parts can be purchased from:
Manufacturer NorComp Interconnect Devices
Connector HDT44P
MATROX IMAGING est distribué par TECHWAY - www.techway.fr - [email protected] - +33 (0)1 64 86 58 30