Motorola i1000plus - Manual (Page 75)

i1000plus User’s Guide
70
Travel Charger
Using the NPN6197 Travel Charger, you can charge a battery from an AC
outlet. On one end of the Travel Charger, an accessory connector attaches to
the bottom of the phone unit. At the other (AC outlet) end of the device,
there is a compact housing that contains the plug-in power supply. A
lightweight cable connects the two ends (accessory connector and supply).
A power light (green LED) on the accessory power supply indicates that the
Travel Charger is plugged in.
Using the Travel Charger
Figure 1. Using the Travel Charger
1. While holding the i1000plus with its front toward you, insert the
accessory connector (with the Motorola logo facing you) into the slot
on the bottom of the i1000plus until you hear a click.
2. Flip open the prongs, and plug the Travel Charger transformer into an
AC wall outlet. The power light (green LED) on the accessory power
supply will come on.
Travel Charger Operating Specifications
Input voltage range: 90-264 VAC @ 50/60 Hz.
Operating temperature range: 0°C to +50°C
Transformer
Accessory Connector