MicroBoards Technology HCL-6000 - Manual (Page 26)

• Operation 26
Setup
7. Screen Saver
Screen Saver:
On
Screen Saver:
Off
Setup
8. Counter
Counter:
On
Counter:
Off
Setup
9. AUTOCOPY Enabled
Microboards B.30
16. AUTOCOPY
11.7 Screen Saver
This menu allows you to choose whether you want to enable the Screen Saver feature. By enabling this
feature, a screen saver will be displayed when your autoloader has been idle for a long period of time.
Use the Up or Down buttons to select the Screen Saver menu and press
the OK button to enter that menu.
Use the Up or Down button to select whether the Screen Saver is on or
off, and press the OK button to select that option.
11.8 Counter
This menu allows you to choose whether you want to enable the Counter feature. By enabling this feature, the
autoloader will prompt you to enter a counter amount and continuously burn discs until it reaches the value
set into the counter.
Use the Up or Down button to select the Counter menu and press the
OK button to enter that menu.
Use the Up or Down button to select whether the Counter is on or off,
and press the OK button to select that option.
For information on entering the counters, see Setting Counters and Assigning Names on page 12.
11.9 AUTOCOPY Enabled
This option turns on the hidden Autocopy menu. The Autocopy function is the simplest way to make CD/DVD
copies. It simplifies the copy process by automatically copying from the Master Disc, which should be placed
on top of the first Input Spindle, to all of the blank discs which follow it. To make copies in Autocopy mode,
you simply:
¾ Fill the input spindle(s) with the required number of blank discs
¾ Place the Master disc on top of the stack in the first input spindle
¾ Press
the 16. AUTOCOPY button
When AUTOCOPY Enabled is turned on, it appears as 16.AUTOCOPY, above option 1.Copy and below
option 15.Shutdown in the main menu structure.
Use the Up or Down button to select the AUTOCOPY Enabled menu and
press the OK button to enter that menu.
Use the Up or Down button to select whether the AUTOCOPY Enabled function is on or off, and press
the OK button to select that option.
Once you get back to the main menu, use the Up or Down button to navigate to the following screen:
Fill the input spindle(s) with the required number of blank discs. Place the
Master disc on top of the stack in the first input spindle, and press the OK
button to start the AUTOCOPY process.