Hard drive setup – MicroBoards Technology HCL-6000 User Manual
Page 21
MICROBOARDS TECHNOLOGY, LLC HCL Series
21
Quick Erasing...
0/25
Microboards B.30
1. Copy (SM)
Microboards B.30
10. Hard Drive Setup
Hard Drive Setup
1. Select Partition
Choose Partition
1->[RESERVED] CD
Choose Partition
2->[DVD1
] DVD
The “0” indicates that zero discs have been erased so far. The “25”
indicates the number programmed into the counter. Once all the discs have
been erased, you will see one of these PASS/FAIL screens:
Counter Specified
No Counter Specified
PASS 25 FAIL 0
Job Completed! Press OK to
Finish
or:
Input Bin Empty (20)
Reset Hoppers?
¾
“PASS 25” indicates 25 discs have
been erased successfully.
¾ “FAIL 0” indicates none of the discs
have failed erase.
Press the OK button to finish
¾ “Input Bin Empty (20)” indicates that the
system has run out of discs to erase.
If you have more discs to erase, you can
empty the Output Spindle; place the discs
to be erased in the Input Spindle and
Press the OK button to continue.
If you have no more discs to erase, press
the
ESC button to terminate the
operation.
10. Hard Drive Setup
The Hard Drive Setup menu consists of following sub-menus:
1
Select Partition
2
Load Partition
3
Rename Partition
4
Delete Partition
5
Partition Info
6
Partition Size
7
Format Hard Drive
Each of these menus is discussed in its own subsection.
If you are at the 1. Copy Menu, do the following:
Use the Up or Down button to find the 10. Hard Drive Setup.
Press the OK button on 10. Hard Drive Setup to enter the menu. Use the
Up or Down button to select between those options.
10.1 Select Partition
The Select Partition submenu is used to select the partition on the Hard Drive that will be used as the default
partition choice for various Hard Drive related tasks.
Press the OK button to enter the Select Partition menu.
Use the Up or
Down button to select the desired partition. The
RESERVED partition is reserved for use by the System under Multi-Master
mode.
Press the OK button to select the desired partition (named DVD1 in this
example).
HARD DRIVE
Quick Button