MicroBoards Technology HCL-6000 - Manual (Page 25)

MICROBOARDS TECHNOLOGY, LLC HCL Series
25
Setup
3. CD Writing Mode
CD Writing Mode
Disc at Once
CD Writing Mode
Track at Once
Setup
4. Max Audio, VCD & CDG
Max Audio, VCD & CDG Speed
16x
Setup
5. Buzzer
Setup
6. Startup Menu
Startup Menu
Copy
11.3 CD Writing Mode
This setting allows you to select which mode to use to duplicate a CD; “Disc at Once” or “Track at Once.”
Unless you understand completely what these modes are, we strongly suggest you to set it to “Disc at Once.”
Use the Up or Down button to select the CD Writing Mode menu and
press the OK button to enter that menu.
Use the Up or Down button to select either Disc at Once or Track at
Once, and press the OK button to select that option.
11.4 Max Audio, VCD & CDG Speed
Due to the lack of any
error checking mechanism for Audio CD, Video CD and CD+G formats, duplicating
them at too high a speed can cause frequent errors like glitches and skips. Use this setting to adjust the
maximum duplication speed for Audio, Video CD and CD+G formats to ensure reliable duplication for such
formats.
The options are: 1x, 2x, 4x, 8x, 12x, 16x, 24x, 32x, 40x, 48x, and 52x.
Use the Up or Down button to select the Max Audio, VCD &
CDG Speed menu and press the OK button to enter that menu.
Use the Up or
Down button to select the desired maximum
writing speed for Audio, VCD and CDG, and press the OK button
to select that option.
Note: The actual speed that is selected may be determined by the drives or by the blank media.
11.5 Buzzer
This setting will allow you to choose whether you want to hear a beep when you press a button or when a
task has been completed.
Use the Up or Down button to select the Buzzer menu and press the
OK button to enter that menu.
Use the Up or Down button to select whether the Buzzer is on or off, and press the OK button to
select that option.
11.6 Startup Menu
This setting will allow you to choose the menu option that you will see first when you turn on the autoloader.
The options are:
¾ Copy
¾ Test
¾ Compare
¾ Test+Copy
¾ Copy+Compare
¾ Select Burn Speed
¾ Select Source
¾ Master
Mode
¾ Erase RW
¾ Hard Drive Setup
¾ Setup
¾ Loader Utilities
¾ System
Utilities
¾ Manage Accounts
¾ Shutdown
Use the Up or Down button to select the Startup Menu option and press
the OK button to enter that menu.
Use the Up or Down button to select the desired startup menu, and press
the OK button to select that option.