Appendix d: troubleshooting, continued – MITSUBISHI ELECTRIC WD-65736 User Manual
Page 78

78
Appendices
NetCommand
Symptom
Remarks
1.
Cannot see the menu from the A/V Receiver.
A/V Receiver Set Up for Audio-Only Switching
t
The A/V Receiver is not connected to any video input of
the TV. To check the A/V Receiver menu, temporarily plug
into an unused input of the TV, such as Input 3. Exit the
Auto Input Sensing screen and select Input 3 from the Input
Selection menu. Press MENU.
A/V Receiver Set Up for Audio and Video Switching over HDMI
t
Use the MENU key on the A/V receiver’s remote control.
A/V Receiver with NetCommand for
t
HDMI.
Press INPUT to open the Input Selection menu. Highlight
the A/V receiver icon and press MENU.
2.
NetCommand unable to learn specific device
keys.
A/V Device does not use IR format for remote control
t
signal. ITT and RF formats cannot be learned.
Room lighting may affect the signal. Have the remotes very
t
close (6 inches or less) to the TV during Learning.
If learning a Mitsubishi remote control, make sure slide
t
switch is not set to TV position.
Some, but not all, device key functions can be learned by
t
NetCommand. For example, POWER and PLAY may be
learned, but other functions may not.
The signal from the remote control may not be strong
t
enough. Insert fresh batteries and try Learning again.
Appendix D: Troubleshooting, continued
Indicators
Symptom
Remarks
1.
LAMP indicator light is a constant red.
Turn the TV off for at least 2 minutes. Turn it back on. If light is
still red, the lamp has failed. Replace it. See Appendix E for lamp
replacement information. For questions, please call Mitsubishi
Consumer relations at (800) 332-2119.
2.
LAMP indicator light is a flashing yellow.
Lamp cover door is open or lamp cartridge is not secure. See
Appendix E for lamp replacement information.
3.
STATUS indicator light is a steady yellow.
t 3PPNUFNQFSBUVSFIBTFYDFFEFEQSPQFSMFWFMT$PPMUIF
room.
t 5IF57IBTPWFSIFBUFE$MFBSCMPDLFEBJSWFOUTBOEFOTVSFBU
least four inches of clearance on all sides of the TV.
t $MFBOUIFBJSGJMUFSPOUIFMBNQDBSUSJEHF4FF"QQFOEJY&
4.
STATUS indicator light is a steady/flashing
red.
t 6OQMVHTFUGSPN"$QPXFS1MVHCBDLJOBOEXBJUPOFNJOVUF
for blinking to stop.
t 1SFTT4:45&.3&4&5CVUUPOBOEXBJUGPSCMJOLJOHUPTUPQ
t *GCMJOLJOHDPOUJOVFT
TFSWJDFJTSFRVJSFE$POUBDUZPVSEFBMFS
or a Mitsubishi Authorized Service Center to arrange for a
service evaluation. Listings of Mitsubishi Authorized Service
locations can be obtained from our web site, www.mitsubi-
shi-tv.com or by calling 1-800-332-2119.