MITSUBISHI ELECTRIC WD-65736 - Manual (Page 43)

5. TV Menus 43
Setup Menu Options
Edit
Use the Edit menu to edit channel options when ANT 1 or ANT 2 is the current source,
To highlight a channel number to edit:
t 1SFTTCH
/ to jump to the next page of channel numbers. Press and hold CH / to speed
through pages.
t 1SFTT to move through all channel numbers, one at a time. Press and hold to speed
through channel numbers.
The TV tunes to the highlighted channel on release of CH / or .
Channel Channels marked with a check are in memory. To add or delete a channel from
memory, highlight the channel number and press ENTER. To add a single digital channel
not in the list, see the notes under Scan on the opposite page.
Digital channels are listed by virtual channel number with the physical channel number
shown in parentheses.
Name Assign a custom name up to six characters long to memorized channels. You can
name analog channels and digital channels if broadcast without pre-assigned names.
1. With the cursor in the Name field, press a number key repeatedly to cycle through
the characters associated with the key, including !, &, blank (1 key) and /, *, - (0 key).
2. Press ENTER to set the letter and move to the next letter position. To delete the
current character and move back one position, press CANCEL.
Fav1–Fav6 Use the six Fav channel banks to store groups of your favorite channels. For example,
you can set up a Fav channel bank for each of your favorite program types (e.g., sports,
news, children’s programs) or set up a bank for each TV user.
t 6TF to move the highlight through the Fav area of the screen.
t 1SFTTENTER to insert a check mark to add the highlighted channel to one of the Fav
banks.
t 5IFTBNFDIBOOFMDBOCFBEEFEUPNVMUJQMF'BWCBOLT
t To remove a channel from a Fav bank, highlight the check mark and press ENTER.
Note: To set up Fav channel banks without using this menu, see “Fav (Favorite Chan-
nels)” on page 30.
Lock Lock channels so that a pass code is required to view them. When you rememorize
channels, all lock settings are cleared.
Highlight the Lock column and enter a pass code when prompted. If you previously
set a pass code to open the main Lock menu, use the same pass code. See “Lock
Menu,” page 48 for more on pass codes.
To lock or unlock a channel, highlight the lock icon for the channel and press ENTER to
switch between the locked and unlocked versions of the icon.
Setup Menu, continued
Edit
Setup menu, Edit channel options
Virtual Channel Number (digital channels only). A channel
number sent by a local broadcaster. Usually the virtual
number is associated with the corresponding analog
channel number. For example, a broadcaster may associ-
ate digital channel 2-1 with their analog channel 2.
Physical Digital Channel Number. The channel number
officially assigned to the actual broadcast frequency; shown
on screen in parentheses.