Lock menu, continued – MITSUBISHI ELECTRIC WD-65736 User Manual
Page 50
50
5. TV Menus
Lock Menu, continued
Time
Blocks all use of the TV during the time period you specify. You must enter a pass code to use the TV when the time
lock is in effect.
Lock by Time
On, Off
Enable or disable Lock by Time.
Lock Time,
Unlock Time
To set the lock and unlock times:
1. Highlight the hour digits for the Lock Time.
2. Press repeatedly to change the hour and associated AM/PM indicator. To move quickly
through the numbers, just press and hold.
3. Press
ENTER to set the hour and highlight the minutes.
4. With the minutes highlighted, press repeatedly to change the minutes. To move quickly
through the numbers, just press and hold.
5. Highlight
the
Unlock Time digits and set the time as described above.
Note: To make Lock by Time active 24 hours a day, make Start Time and Stop Time the same.
Other Menu Options (alternate rating system)
This TV can recognize new rating systems that may come into effect in the future. The Other option remains grayed
out until the TV receives a signal using an alternate rating system. Such alternate rating systems will apply only to
digital programming received on the ANT 1 and ANT 2 inputs.
Option Name and Description
Lock
On, Off
Enable or disable program blocking.
System Name
The rating system available for the channel
Group
Rating groups available in the rating system shown on the screen. Rating groups are defined by
the rating system in effect.
Rating
Rating restrictions available in the selected rating system and group. Highlight the rating and
press ENTER to check (block) or uncheck (allow) rated content.
Control Panel
On, Off
On locks and Off unlocks the buttons on the TV’s control panel. Use this option if small children
may try to press TV buttons.
If the remote control is unavailable, use the control panel to release the Control Panel Lock. Press
and hold the MENU button for over eight seconds. You can do this to release the lock even if the TV
is powered off. To reactivate the lock, you must return to this menu and change the setting to On.