Gateway ALR 7300 - Manual (Page 74)

64 Maintaining and Troubleshooting the Gateway ALR 7300 Server
• System Time lets you set the system time. Use a twenty-four hour
clock in the format HH:MM:SS.
• System Date lets you set the system date, using the format
MM:DD:YYYY.
• Legacy Diskette A: allows you to select the type of diskette drive
installed as drive A. The options are
360 kB, 5 ¼”; 1.2 MB, 5 ¼”;
720 kB, 3 ½”; 1.44/1.25 MB, 3 ½”;2.88 MB, 3 ½”; Not installed;
and Disabled .
• Legacy Diskette B: allows you to select the type of diskette drive
installed as drive B. The options are
360 kB, 5 ¼”; 1.2 MB, 5 ¼”;
720 kB, 3 ½”; 1.44/1.25 MB, 3 ½”;2.88 MB, 3 ½”; Not installed;
and Disabled .
• Primary Master: opens the Primary Master screen to permit you
to setup the primary master hard disk drive. Details of this screen
are provided in the section “Hard disk drive setup screen” on
page 65.
• Primary Slave: opens the Primary Slave screen to permit you to
setup the primary slave hard disk drive. Details of this screen are
provided in the section “Hard disk drive setup screen” on page 65.
• Secondary Master: opens the Secondary Master screen to permit
you to setup the secondary master hard disk drive. Details of this
screen are provided in the section “Hard disk drive setup screen”
on page 65.
• Secondary Slave: opens the Secondary Slave screen to permit you
to setup the secondary slave hard disk drive. Details of this screen
are provided in the section “Hard disk drive setup screen” on
page 65.
• System Memory: shows the amount of base system memory
detected.
• Extended Memory: shows the amount of extended memory
detected.
4075.book Page 64 Friday, April 2, 1999 9:26 AM