Gateway ALR 7300 - Manual (Page 107)

Troubleshooting 97
The video is distorted.
Probable Cause Solution
The monitor controls are
not properly adjusted. Adjust the monitor controls until the text
becomes clear. (See your monitor
documentation for more information.)
The connector or cable
is damaged. Check the connector and cable for bent or
damaged pins.
The surge protector or
uninterruptible power
supply (UPS) is
damaged. Disconnect the monitor power cable and
connect it directly to the power source.
The monitor is too close
to a source of electrical
interference. Move the monitor away from sources of
electrical interference, such as televisions,
unshielded speakers, microwaves, fluorescent
lights, and metal beams or shelves.
The monitor needs to be
degaussed. Turn off the computer and monitor and leave
them off for at least a half hour, and then
restart the system.
4075.book Page 97 Friday, April 2, 1999 9:26 AM