Replacing the raid cage in the 5.25-inch drive bay – Gateway ALR 7300 User Manual
Page 54
44 Maintaining and Troubleshooting the Gateway ALR 7300 Server
Replacing the RAID cage in the 5.25-inch drive bay
The Quick Hot-Swap Drive Cage consists of a drive cage, a locking door,
and all the necessary hardware to install it in the system. Each cage
supports three drives. Begin cage installation from the bottom drive bay.
Figure 26: Hot-Swap Drive Cage
1.
Remove the side panel as described in “Removing the side panel” on
page 3.
2.
Disconnect all cables connecting the RAID Cage to other system
components.
3.
Remove the drives:
A.
Pull the latching clips outward to release the drive from the RAID
Cage (see Figure 27).
To Replace the RAID Cage
4075.book Page 44 Friday, April 2, 1999 9:26 AM
See also other documents in the category Gateway Computers:
- E-2300 (134 pages)
- E-4100 (144 pages)
- E-4650 (134 pages)
- E-6300 (136 pages)
- E-9232T (96 pages)
- 610 (108 pages)
- ProfileTM 5 (292 pages)
- Profile 6 (130 pages)
- E SERIES E-6000 (190 pages)
- SZSL95IN0XXXXXXXX (132 pages)
- 8400 (34 pages)
- DX4800 (94 pages)
- GR380 F1 (17 pages)
- MAN FX510 (150 pages)
- GM5688E (140 pages)
- GR585 F1 (14 pages)
- 6400 (148 pages)
- GM5478 (2 pages)
- 7400 (156 pages)
- E-5250 (46 pages)
- FX6710 (1 page)
- E-9425R (118 pages)
- ALR 7200 (134 pages)
- FX542X (154 pages)
- 7250R (135 pages)
- 7250R (26 pages)
- DX430X (96 pages)
- 8450R (4 pages)
- 8450R (172 pages)
- 7450R (124 pages)
- E-5400 (130 pages)
- E-5200 (46 pages)
- PC (110 pages)
- GR160 F1 (14 pages)
- ALR 8300 (128 pages)
- eMachine 3 (96 pages)
- 9415 (188 pages)
- 980 (131 pages)
- 9210 (106 pages)
- E1400 (136 pages)
- FX542XT (94 pages)
- E3400 (126 pages)
- Media Center (28 pages)
- MT-6733 (3 pages)