Gateway ALR 7300 - Manual (Page 42)

32 Maintaining and Troubleshooting the Gateway ALR 7300 Server
Figure 15: Installing the Second Processor
6. Place the lock bar on top of the supports and secure it by inserting and
tightening the two screws you removed in Step 3.
7. Set the jumpers for the new processor configuration (see the section
“Setting the jumpers” on page 33).
8. Insert the VRM into the connector provided until the release clips
click into place.
9. Close the case, as described in “Closing the system” on page 8.
10. Reconnect the power cord and turn on the system.
4075.book Page 32 Friday, April 2, 1999 9:26 AM