Gateway ALR 7300 - Manual (Page 50)

40 Maintaining and Troubleshooting the Gateway ALR 7300 Server
9. Place the drive bracket in the chassis (see Figure 23). If you are
installing a second front-accessible drive, do not reinstall the 3.5-inch
metal filler panel when you reinstall the drive bay in the chassis.
Figure 23: Replacing the Drive Bracket
10. Secure the drive bracket to the chassis with the screws you removed in
Step 5.
11. Connect the power and data cables to the 3.5-inch drive, making sure
the cables match their original position. (See drive documentation for
proper drive jumper settings and cable orientation.)
12. Close the case, as described in “Closing the system” on page 8.
13. Reconnect the power cord and turn on the system.
4075.book Page 40 Friday, April 2, 1999 9:26 AM