GE GEFanuc Automation Programmable Control Products TCP/IP Ethernet Communications for the Series 90t-70 PLC GFK-1004B - Manual (Page 266)

Index
Index-5 GFK-1004B TCP/IP Ethernet Communications User’s Manual – January 1996
Network Downloading, 2-23
Network Load Address, C-3
NODE Command, Station Manager, 5-27
Number of repetitions for a Channel
Command, 4-12 , 4-16 , 4-19
O
OK Command, Station Manager, 5-27
ONLINE LED, 2-3
Operational State, 6-8
Optimizing the GSM for Network Opera-
tion, D-12
P
PASSWORD, 3-28
PC Network Card, Changing, 3-12
PC Network Card, Installing, 3-5
Period for Channel Commands, 4-12 ,
4-16 , 4-19
PING Command, Station Manager, 5-27
PING Station Manager command, 2-30
Pinging the TCP/IP Interfaces on the Net-
work, 2-30
PLC Driver Tallies (Tally c), 5-36 , 5-37
PLC memory types, 4-13
PLC Module Configuration, 2-11
Ports
AUI, 2-4 , B-3
Serial, 2-4
Power–Up Problems, 2-10
Power–up State, 6-5
Powering–Up the Ethernet Interface,
2-7 , 2-9
PRIORITY, 3-28
Problems During Power Up, 2-10
Problems During the Download, 2-23
PROG Command, Station Manager, 5-28
REM Command, Station Manager, 5-28
PROTMAN.xxx, 3-9
PROTOCOL.GSM, 3-9
Q
Quick Guide to the Manual, 1-7
R
Remote Operation of the Station Manag-
er, 5-4
Remote PLC, 4-11 , 4-15
Repetitions, number of for Channel Com-
mands, 4-12 , 4-16 , 4-19
REPORT Command, Station Manager,
5-29
REPP Command, Station Manager, 5-30
Requirements for Installing the Ethernet
Interface, 2-5
Resource problem bit, 4-27
Restart Button, 2-3
RESTART Command, Station Manager,
5-30
Re-tasking a channel, 4-9
Retrieve Detailed Channel Status com-
mand (2002), 4-22
RX_RING_LEN, 3-25
S
Sample ladder program, 4-34
Send Information Report command
(2010), 4-18
Sequencing communications requests,
4-39
Serial Cable, GSM to Ethernet Interface,
B-2
Serial Number Label, 2-4
Serial Port, 2-4
Serial port configuration, 2-15
Serial Port for Local GSM Communica-
tions, B-1
Serial Port Pinouts, B-1
Serial Port Settings, B-1