GE GEFanuc Automation Programmable Control Products TCP/IP Ethernet Communications for the Series 90t-70 PLC GFK-1004B User Manual
Page 203

6
6-32
TCP/IP Ethernet Communications User’s Manual – January 1996
GFK-1004B
Table 6-10. Exception Log Event Codes - Continued
ББББББ
ББББББ
ББББББ
Log Event
Code
ББББББББББББББББББББББ
ББББББББББББББББББББББ
ББББББББББББББББББББББ
Possible Cause and Resolution
ББББББ
ББББББ
ББББББ
ББББББ
ББББББ
ББББББ
ББББББ
ББББББ
ББББББ
ББББББ
ББББББ
ББББББ
ББББББ
ББББББ
ББББББ
ББББББ
ББББББ
ББББББ
ББББББ
ББББББ
ББББББ
ББББББ
ББББББ
ББББББ
ББББББ
ББББББ
ББББББ
ББББББ
ББББББ
ББББББ
ББББББ
ББББББ
ББББББ
Event “1c”
Channel API
events
ББББББББББББББББББББББ
ББББББББББББББББББББББ
ББББББББББББББББББББББ
ББББББББББББББББББББББ
ББББББББББББББББББББББ
ББББББББББББББББББББББ
ББББББББББББББББББББББ
ББББББББББББББББББББББ
ББББББББББББББББББББББ
ББББББББББББББББББББББ
ББББББББББББББББББББББ
ББББББББББББББББББББББ
ББББББББББББББББББББББ
ББББББББББББББББББББББ
ББББББББББББББББББББББ
ББББББББББББББББББББББ
ББББББББББББББББББББББ
ББББББББББББББББББББББ
ББББББББББББББББББББББ
ББББББББББББББББББББББ
ББББББББББББББББББББББ
ББББББББББББББББББББББ
ББББББББББББББББББББББ
ББББББББББББББББББББББ
ББББББББББББББББББББББ
ББББББББББББББББББББББ
ББББББББББББББББББББББ
ББББББББББББББББББББББ
ББББББББББББББББББББББ
ББББББББББББББББББББББ
ББББББББББББББББББББББ
ББББББББББББББББББББББ
ББББББББББББББББББББББ
Entry 6
of any Channel API exception is a code uniquely identifying the software
component of the Channel API which reported the exception.
Entry 2
(hexadecimal) codes are as follows:
1
“LAN system-software fault; resuming”
Internal error: The Channel API software encountered an internal use (as
opposed to user application use) of a channel number that is out-of-range.
Entry 3
contains the offending channel number.
3
“LAN data memory exhausted-check parms; resuming”
Internal error: An attempt to allocate a buffer failed. Entry 3 contains the
channel number. Entry 4 contains the number of bytes the Channel API was
attempting to allocate.
4
“LAN system-software fault; resuming”
Internal error: The Channel API detected the improper internal use of a
NULL pointer to a channel machine.
5
“LAN system-software fault: aborted assoc. & resuming”
Internal error: A Channel API event arrived in a channel machine state that
is not intended to handle the event.
Entry 3
contains the aborted channel number. Entry 4 contains a code
uniquely identifying the event. Valid event codes are:
1 TCP_DATA_RDY
2 TCP_ERROR
3 TCP_CONN_OK
4 TCP_FIN_RCVD
5 TCP_USER_RESET
6 TCP_CONN_IND
7 TCP_OKTOSND
8 BPX_FRESH_DATA
9 BPX_WR_DATA_ACK
a CMD_EC
b TIMER_INTERVAL
c TIMER_TIMEOUT
d XFER_ERROR
e END_OF_SWEEP
f UPDATE_WAIT_EXPIRE
6
“Backplane communications with PLC fault; lost request”
Internal error: An attempt to write to the user-specified reference address to
be used to hold the COMMREQ Status (CRS) bits failed internally. Entry 3
contains the CRS word value to be written. Entry 4 contains the Segment
Selector of the reference addressed. Entry 5 contains the (zero-based) Offset
of the reference address.