Gossen THERMAL GRAPHICS PRINTERS IPP 144 - 40 G - Manual (Page 54)

52
In the case of GS k m n:
m Barcode-System Definable range of k Definable range of d
65 UPC-A fixed (11 ≤ n ≤ 12) 48 ≤ d ≤ 57
66 UPC-E fixed (11 ≤ n ≤ 12) 48 ≤ d ≤ 57
67 JAN13 (EAN) fixed (12 ≤ n ≤ 13) 48 ≤ d ≤ 57
68 JAN8 (EAN) fixed ( 7 ≤ n ≤ 8 ) 48 ≤ d ≤ 57
48 ≤ d ≤ 57
69 CODE39 variable (1 ≤ n ≤ 255) 65 ≤ d ≤ 90
32,36,37,43,45,46,47
70 ITF variable (1 ≤ n ≤ 255, 48 ≤ d ≤ 57
even number)
48 ≤ d ≤ 57
71 CODABAR variable (1 ≤ n ≤ 255) 65 ≤ d ≤ 68
36,43,45,46,47,58
72 CODE93 variable (1 ≤ n ≤ 255) 0 ≤ d ≤ 127
73 CODE128 variable (2 ≤ n ≤ 255) 0 ≤ d ≤ 127
<< Details >>
In the case of GS k m:
This command is terminated by the NULL code.
In the case of UPC-A and UPC-E, after 12 bytes of
barcode data are entered, the barcode is printed, and
subsequent data is processed as normal data.
In the case of JAN-13, after 13 bytes of barcode data are
entered, the barcode is printed, and subsequent data is
processed as normal data.
In the case of JAN-8, after 8 bytes of barcode data are
entered, the barcode is printed, and subsequent data is
processed as normal data.
The number of data of an ITF barcode must be an even
number. If is an odd number, the last data is ignored.
After the number of input data reaches 255, the
processing of the command starts automatically.
In the case of GS k m n:
n denotes the number of data. n bytes of subsequent
data are processed as barcode data.
If n is outside the definable range, the processing of the
command stops, and the subsequent data is processed
as normal data.