Gossen THERMAL GRAPHICS PRINTERS IPP 144 - 40 G - Manual (Page 12)

10
3. Design and Installation
Design
1 Paper and cutting edge
2 Key: LINE / FEED / Enter
3 Key: MENU / Select
4 Alarm LED (paper end indicator)
5 Serial interface
Interface II (only version E)
6 Serial Interface I
7 Voltage supply
8 Alarm contact
(paper end only version E)
9 Snap lock
10 Mounting screws
11 Protective conductor
connection. Must be
connected to ground.
12 Connection / paper reroll
mechanism IPP-AW
Make sure that the unit is properly
mounted before connection and power on.
Front