Gossen THERMAL GRAPHICS PRINTERS IPP 144 - 40 G - Manual (Page 28)

26
DATA FORMAT There are two formats available:
7 - bit- or 8 - bit - transmission
1 startbit / ... / parity / 1 stoppbit
Attention:
With 7 bit NO PARITY, the sender must be set to 2
stoppbits !
PARITY There are five options available:
Even; Odd; Mark; Space; No parity.
There is no check made.
6.3. Date / Time ( only E-version )
Date entry Date and time are factory set. In order to modify
these values the menu program must be called and
the following message must be displayed:
SET CALENDAR NO ?
„SELECT“
YES ?
„ENTER“
SET CALENDAR 15. 03.04
_5. 03. 04
Each printer IPP 144 - 40 G / IPP 144 - 40 GE can be
addressed. This allows the concurrent supply of diffe-
rent data to several printers via one data line.
Up to 31printers may be called from one sender (e.g. a
PLC). The respective address is set in the menu
program.
for more information see chapter 7.2. „Addressing“ !
PRINTER
ADDRESS