Gossen THERMAL GRAPHICS PRINTERS IPP 144 - 40 G - Manual (Page 23)

21
5.3. Menu Program
All functions of the IPP 1444 are set via menu program
using the „ENTER“ and „SELECT“ keys and are saved when
the user quits the program.
From then the IPP 144 automatically uses these
parameters.
The print format for the printout of the parameters is always
NORMAL with 48 character per line, so that the parameters
can be read during printing.
Entering
the menu
program
Print current
parameters
The possible setting are explained in chapter 6.
Press the „MENU / SELECT“ key for approx.
3 seconds.
The IPP 144 reacts by printing
„ACTUAL PARAMETRS ? PRESS „ENTER“
Press the „ENTER“ key,
the IPP 144 prints the currently set parameters.
The final printout says
„CHANGE PARAMETERS ?“