Gossen THERMAL GRAPHICS PRINTERS IPP 144 - 40 G - Manual (Page 26)

24
6. Adjustment
6.1. General Functions
The various functions and device parameters are selected
and set via the menu program (see chapter 5.3.).
The appendix contains a summary.
NORMAL: The printout can be read during printing, the
last print line is at the top.
INVERSE: The printout is made top down, the last print
line is at the bottom. In this case the
printout is in the proper chronological order
after the paper has been torn off.
90-degree rotation: It is possible to set the printing with
90-degree right or left rotation. This
function can not be set via the menu
program but via control commands
(see section 8.3. „Details of Printer
Control Commands“).
PRINT
FORMAT
CHARACTER /
LINE 48: 48 character per line = standard character width
24: 24 character per line
16: 16 character per line
8: 8 character per line
The character width can be switched via the serial interface
(at the beginning of a line and only if the input buffer is empty).
CHARACTER
SET Available character sets are:
ASCII, GERMAN, FRENCH, SWEDISH/FINNISH (S/SF),
DANISH, NORWEGIAN, SPANISH, UK (English) and
CYRILLIC.
Character sets see appendix 8.2. „Character Sets“ !
Print formats can be switched via the serial interface (see
appendix 8.2. „additional control characters“), if the input
buffer is empty!