Gossen THERMAL GRAPHICS PRINTERS IPP 144 - 40 G - Manual (Page 35)

33
With Handshake, provided RTS (or XON/XOFF protocol) is
used to control the data transmitter:
Data input:
1 2 3
Actual Print-out:
Machine No. 3 pre-stored Text No. 1
Automatic mode pre-stored Text No. 2
Status NORMAL pre-stored Text No. 3
7.4. Version E (IPP 144 - 40 GE)
7.4.1.Text Entry
Text can only be entered via interface II.
The maximum text length is 40 characters; if the text length
exceeds 40 characters only the first 40 characters are
saved.
Text will be input via Windows programming software. There
is a special task for inputting, adding, overwriting and
deleting texts. The text number must be two-digit.
You must set the following printer parameters:
Baudrate: 9600
Data format: 8
Parity: NO PARITY
Interface: SERIAL
For details of the Input task see the Windows programming
software manual.