FUJITSU M5000 - Manual (Page 277)

Appendix C FRU List C-11
C.8.2 CD-RW/DVD-RW Drive Unit (DVDU)
There are two types of CD-RW/DVD-RW drive units: tray load or slot load. Each
type of drive unit will connect only with its corresponding drive unit backplane.
TABLE C-9 lists the features, location, and specifications of the CD-RW/DVD-RW
Drive Unit.
Refer to Section 6.2, “CD-RW/DVD-RW Drive Unit (DVDU) Replacement” on
page 6-12 for replacement procedures.
C.8.3 Tape Drive Unit (TAPEU)
TABLE C-10 lists the features, location, and specifications of the optional tape drive
unit.
TABLE C-9 CD-RW/DVD-RW Drive Unit Features and Specifications for Midrange
Servers
Midrange Servers
Number of CD-RW/DVD-RW Drive Units 1
Location Front of system to the right of the disk drives
Active replacement capability No
Hot replacement capability Yes
Cold replacement capability Yes
Interface Advanced Technology Attachment Packet Interface
(ATAPI)
TABLE C-10 Tape Drive Unit Features and Specifications for Midrange Servers
Midrange Servers
Number of tape drive units 1 (optional)
Location Front of system
Active replacement capability Yes
Hot replacement capability Yes
Cold replacement capability Yes
Tape drive unit type * Digital audio tape (DAT) drive
Interface Serial Advanced Technology Attachment (SATA) (see
TABLE C-11 )