FUJITSU M5000 - Manual (Page 242)

14-8 SPARC Enterprise M4000/M5000 Servers Service Manual • December 2010
14.1.4 Securing the Server
1. Install the CD-RW/DVD-RW Drive Backplane.
This step includes installing the CD-RW/DVD-RW Drive Backplane and the
CD-RW/DVD-RW Drive Unit. See
Section 6.2.8, “Installing the CD-RW/DVD-RW
Drive Backplane of the M4000 Server” on page 6-19 .
2. Install the fan cover.
a. Align the tabs on the forward section of the fan cover and push the cover
down to secure it in place.
b. Tighten the captive screw on the fan cover.
c. Install the 60-mm fans.
Caution – The motherboard unit is a long and heavy assembly that houses the
system motherboard on the underside. Two people are recommended to lift the unit.
3. Install the motherboard unit.
This step includes installing the CPU modules and reattaching the cable
management arm. See
Section 13.1.3, “Installing the M4000 Server Motherboard
Unit” on page 13-6 .
4. Install the XSCF unit.
See Section 9.1.3, “Installing the XSCF Unit” on page 9-5 .
5. Install the I/O unit.
See Section 8.3.3, “Installing the I/O Unit” on page 8-11 .
6. Install the power supply units.
See Section 7.1.3, “Installing the Power Supply Unit” on page 7-5 .
7. Install the top cover.
This step includes sliding the server in to the equipment rack and restoring the
rack antitilt features to their original position. See
Section 5.2.2, “Replacing the Top
Cover” on page 5-8 .
8. Power on the server.
This step includes reconnecting power cables, verifying the state of the LEDs, and
turning the keyswitch to the Locked position. See
Section 4.4.2, “Powering the
Server On Using Software” on page 4-13 .