4 installing the cd-rw/dvd-rw drive unit, 5 securing the server, Installing the cd-rw/dvd-rw drive unit – FUJITSU M5000 User Manual
Page 109: Securing the server
Chapter 6
Storage Devices Replacement
6-17
6.2.4
Installing the CD-RW/DVD-RW Drive Unit
Caution –
Do not force the CD-RW/DVD-RW Drive Unit into the slot. Doing so can
cause damage to the component and server.
●
Place the CD-RW/DVD-RW Drive Unit into the drive slot and gently push it in
until it locks in place.
6.2.5
Securing the Server
1. Power on the server.
This step includes reconnecting power cables, and turning the keyswitch to the
Locked position. See
Section 4.4.2, “Powering the Server On Using Software” on
.
Note –
If the Oracle Solaris automatic booting is set, use the sendbreak -d
domain_id command after the display console banner is displayed but before the
system starts booting the operating system to get the ok prompt.
2. Confirm the hardware.
This step includes running programs to be certain all components are mounted
again and then booting the operating system.
Refer to
Section 4.3.2, “Verifying Hardware Operation” on page 4-9
for more
information.