Fujitronic Programmable Operation Display UG520H-x - Manual (Page 34)

1 - 25
Data Setting
Function Performance Specifications (All the UGx20 series)
Item
Screens
Screen Memory
Switches
Actions of Switch
Lamps
Graphs
Numerical Data Display
Character Display
Message Display
Messages
Sampling
Multi-Overlaps
Data Blocks
Graphic Libraries
Patterns
Macro Blocks
Page Blocks
Direct Blocks
Screen Blocks
Temp. CTRL / PLC 2 Way
Calendar
Hard-Copy
Buzzer
Back-light Auto OFF Function
Self-diagnostic Function
* 1 Screen memory capacity of the main unit with the following or newer hardware version
(Approx. 760k bytes for older versions or UG221/UG220)
For hardware version, check the value of the 3rd digit from the left in "Ser. No." line on the rear of the main unit:
UG520H-V
6; UG520H-S 5; UG420H-V 8; UG420H-T 9; UG420H-S 7; UG320H 4
* 2 Layer : 4 per screen (base + 3 overlaps)
* 3 For the memory setting limit, refer to the User's Manual (FEH376).
* 4 The main unit with the following or newer hardware version is adapted to the temperature controller network:
UG520H-V 4; UG520H-S 3; UG420H-V 5; UG420H-T 5; UG420H-S 4; UG320H 7
Specifications
Max. 1024
FP-ROM (flash memory), Appox. 2,816Kbytes
* 1
(different from the language)
768 per screen (192 per screen for UG221/220 : However, the number of
memory settings is limited.)
* 3
Set, reset, momentary, alternate, to light
possible to press a function switch and a display switch at the same time
(With UG221, 2 switches on the display can be pressed at the same time.)
Reverse, blinking, exchange of graphics
768 per screen (192 per screen for UG221/220 : However, the number of
memory settings is limited.)
* 3
Pie, bar, panel meter and closed area graph can be displayed without limit.
Total capacity per screen: within 128KB
Statics and trend graphs: Max. 256 per layer
* 2
(However, the number of memory settings is limited.) * 3
No limits, total capacity per screen: within 128 KB
(However, the number of memory settings is limited.)
* 3
No limits, total capacity per screen: within 128 KB
(However, the number of memory settings is limited.)
* 3
Resolution : 320 240, Max. 40 characters
640 480, Max. 80 characters
800 600, Max. 100 characters
No limits, total capacity per screen: within 128 KB
(However, the number of memory settings is limited.)
* 3
6144 lines
Sampling display of buffer data
(constant sample, bit synchronize, bit sample, relay sample, alarm function)
Max. 1024
Max. 1024
Max. 2560
Max. 1024
Max. 1024
Max. 1024
Max. 1024
Max. 1024
Max. 32 * 4
provided
provided
provided, 2 types (intermittent short and long sounds)
ON at all time, specified freely
Self-test function of switches
Check function of communication parameter setting
Check function of communication
8 Specifications