FOCUS Enhancements FS-2 - Manual (Page 21)

FS-2/2E Studio DTE Disk Recorder User Guide
1
Chapter 1
Introduction
Thank you for purchasing the Focus Enhancements FS-2/2E DTE DV Studio Disk
Recorder.
The FS-2/2E is designed for use as a record or playback device in studios, mobile
vans and other installations.
The purpose of this User Guide is to explain the features and operation of the FS-2/
2E. Study the contents of this User Guide before attempting to use your FS-2/2E.
Check the Focus Enhancements website regularly for updates to FS-2/2E software
and documentation: www.focusinfo.com/support .
Alternatively, contact your Focus Enhancements dealer/distributor.
This chapter contains the following sections:
What is a DTE Disk Recorder? page 2
What is the FS-2/2E? page 2
Basic Applications page 3
Receiving, Unpacking, and Inspecting page 3
Package Contents page 4
Installation and Site Requirements page 5
Mounting in a 19 inch Electronics Rack page 6
Inserting the Internal 3.5 inch IDE Drive page 7
Using External Disk Drives page 7
Physical Features page 8
Setting Up the FS-2/2E page 12
Formatting the Drive page 13
Setting the Time and Date page 14
Replacing the Power Module Fuse page 15
FS-2E Provides Greater Embedded Audio SDI Functionality
The FS-2E provides even more embedded audio SDI functionality. It includes the ability to
selectively record either channels 1 and 2 or 3 and 4 of the embedded audio of the input SDI
stream. It also provides full support of the SDI audio out. The FS-2E inserts the recorded audio
into the SDI output stream. The FS-2 does not possess these capabilities.