3 os upgrade, Os upgrade, Copy software to fs-2/2e internal drive – FOCUS Enhancements FS-2 User Manual
Page 75
FS-2/2E Studio DTE Disk Recorder User Guide
55
2.5.12.3 OS Upgrade
To upgrade operating system (OS) software, you must download
a new .bin file to a FireWire drive on your computer. The latest
version of FS-2/2E software can be downloaded from http://
www.focusinfo.com/support.
There are three methods for installing new FS-2/2E software:
• Via the Web Interface, see
Updating FS-2E Software via FTP
• Directly onto the FS-2/2E internal drive, see the following
procedure.
• From an external FireWire drive, see the following
procedure.
To begin:
1.
Download software from the Focus Website to your local
computer.
2.
Unzip file using WinZip (Windows) or Stuffit (Macintosh)
on a computer system with a FireWire (IEEE-1394)
connection.
3.
Rename the unzipped file,
XXXX.bin
, to
fs2.bin
.
2.5.12.3.1
Copy Software to FS-2/2E Internal Drive
To install new OS software onto the internal drive of
the FS-2/2E, do the following:
1.
Using a FireWire cable, connect the computer and
FS-2/2E through the FS-2/2E port labeled,
To
HDD
.
2.
Copy the
fs2.bin
file to the internal drive of the
FS-2/2E.
3.
Enter the FS-2/2E menu and select
SETUP
.
4.
From the
SETUP
menu, select
OS UPGRADE
.
The following screen appears:
UPGRADE
SYSTEM
FIRMWARE?
EXIT
YES
NO