Ub preset, Tc delay (fs-2e only), Drop/non drop – FOCUS Enhancements FS-2 User Manual
Page 83
FS-2/2E Studio DTE Disk Recorder User Guide
63
3.
Press
EXIT
to return to the menu screen.
2.5.12.10.2 UB Preset
2.5.12.10.3 TC Delay (FS-2E only)
The TC DELAY menu is only available for the FS-2E,
or FS-2 (with the 2.0 upgrade). This menu allows you
to delay the recorded timecode up to 29 frames.
TC DELAY: 00
1.
Use (middle soft key) and (right soft key) to
adjust the delay value.
2.
Press
EXIT
when done.
2.5.12.10.4 Drop/Non Drop
For DROP and NON-DROP, select the mode. The
highlighted mode is the current mode after exit.
This selection is not applicable for PAL use. On the
FS-2/2E display, DROP is identified by a semicolon (
;
)
and NON-DROP by a colon (
:
).
1.
Press
EXIT
to return to the menu screen.
You cannot set UB values after selecting EXT TC mode in
the TC MODE menu.
UB PRESET
00:00:00:00
|
&
|
MOVES CURSOR
EXIT
DROP
NON-DROP
EXIT