3 updating fs-2e software via ftp, 1 connecting with the fs-2e, Updating fs-2e software via ftp – FOCUS Enhancements FS-2 User Manual
Page 129: Connecting with the fs-2e
FS-2/2E Studio DTE Disk Recorder User Guide
109
4.3 Updating FS-2E Software via FTP
Periodically check the Focus Enhancements web site for FS-2E software updates, go
to
http://www.focusinfo.com/support
.
Before uploading the software, verify the file name and determine that the FS-2E is
enabled for FTP operations.
1.
Unzip the update software and verify that the file name is
fs2.bin
. If not,
rename the file.
2.
Select the
System Config
tab.
3.
Verify that
FTP
is enabled, see
4.3.1 Connecting with the FS-2E
Contact the System Administrator to get the FS-2E’s network IP address,
logon, and password.
1.
Open a browser.
2.
Enter the FS-2E’s FTP address in the browser
Address
field.
The FS-2E factory default IP address is
192.168.0.102
.
3.
If the FS-2/2E is configured for a secure logon, the FTP path may be in
the form
ftp://logon:password@ipaddress
; example
ftp://fs2:[email protected]
.
4.
Press
Enter
or select
Go
.