8 file name, 9 factory reset, 10 diagnostic – FOCUS Enhancements FS-2 User Manual
Page 103: Current clip, File name, Factory reset, Diagnostic
FS-2/2E Studio DTE Disk Recorder User Guide
83
2.5.13.7.2
CURRENT CLIP
This selection performs a similar function, but on the
selected clip only. If an error is found, the
FS-2/2E prompts you to repair the problem.
CURRENT CLIP repairs the last file in the current
session if it has been damaged.
• Select between volumes by pressing the
|
and
|
buttons. Press
EXIT
to return to the
menu screen.
2.5.13.8 File Name
This selection displays the base file name of the selected clip.
2.5.13.9 Factory Reset
When you select this function, the FS-2/2E reverts all settings and
values back to its factory default state.
1.
Press
YES
to start factory reset.
2.
Press
EXIT
or
NO
to exit from the menu.
2.5.13.10 Diagnostic
This is a setting used for diagnosing field issues. Do not change it
unless told to by Focus Enhancements Technical Support.
• Press
EXIT
to exit from the menu.
Warning: Factory Reset is can not be undone!!!
CLIP 1-001
BASE:
20010612-166523
EXIT
DIAG LVL:
EXIT
00