4 restoring the factory default operating system, 5 pal/ntsc, Restoring the factory default operating system – FOCUS Enhancements FS-2 User Manual
Page 77: Pal/ntsc

FS-2/2E Studio DTE Disk Recorder User Guide
57
2.5.12.4 Restoring the Factory Default Operating System
To restore the factory default Operating System hold down the
Left
and
Middle
soft keys located under the LCD during boot up.
2.5.12.5 PAL/NTSC
Use this screen to select the record standard as either PAL or
NTSC. The highlighted selection is the current one after exit. The
FS-2/2E uses this video standard for both playback and record.
Do Not Combine PAL and NTSC Clips on the Same Drive.
NTSC
PAL
EXIT
This manual is related to the following products: