FOCUS Enhancements FS-2 - Manual (Page 85)

FS-2/2E Studio DTE Disk Recorder User Guide
65
FS-2/2E Functions
• The highlighted mode is the current mode after exit.
• Press
EXIT to return to the menu screen.
2.5.12.13 GPI Port
This menu allows you to change the setting of the GPI port.
• The highlighted function is the current setting after exit.
• Press
EXIT to return to the menu screen.
• DISABLE - This selection allows you to connect a 3.5mm to
DB9 cable to the GPI port (CBLA-0113-01) and control the
FS-2/2E using RS232C from an external device. You can also
use the FS-2/2E with the optional wired remote control unit
(ACSS-0019-01). Purchase this item at the Focus
Enhancements online store:
https://www.focusinfo.com/webstore/webstore.asp .
The remaining three selections allow functions to occur from a
simple contact closure as follows:.
• PAUSE/UNPAUSE -This selection allows control of pause and
unpause during a record or playback session.
• INDEX (NEW FILE) - This setting creates a new file during a
record session without losing any frames.
• REC SNAPSHOT - This setting records a single frame of video
to a file. Each sequential use of this function captures another
frame to the same file until stopped.
DISABLE
PAUSE/UNPAUSE
INDEX / NEW FILE)
REC SNAPSHOT
EXIT